The FXR ball joints are equipped with adjustable head. These ball joints are designed to reduce tensions, caused by the wind, near the drilled glass.
This patented FXR ball joints are tested and certified by both the Department of Structured Analysis of the Technical University Darmstadt and by the French government agency Institute of Building: CSTB. The ball joints of SADEV are approved by the CSTB and certified with an "Avis Technique".
|
‹ back
|
FXR 1001
Application
This rotule is recommended for facades where the glass is easily accessible from the back.
Type hole in the glass: sunk.
Standard bolt: M14, length 65 mm.
Other sizes are available upon request
download Technical documentation (485 KB)
|
‹ back | more ›
|
FXR 1001 A
Application
Same as the 1001 but designed for insulated glass where the aluminum ring is included.
Type hole in the glass: sunk.
Standard bolt: M14, length 65 mm.
Other sizes are available upon request
download Technical documentation (533 KB)
|
‹ back | more ›
|
FXR 1101
Application
Same as the 1001 but with smaller dimensions
Type hole in the glass: sunk.
Standard bolt: M14, length 65 mm.
Other sizes are available upon request
download Technical documentation (483 KB)
|
‹ back | more ›
|
FXR 1003
Application
The same as the 1001 but with a cylindrical hole and is intended for canopies
Type hole in the glass cylindrical
Standard bolt: M14, length 65 mm.
Other sizes are available upon request
download Technical documentation (483 KB)
|
‹ back | more ›
|
FXR 1003 A
Application
Same as the 1003 but designed for insulated glass where the aluminum ring is included.
Type hole in the glass: cylindrical
Standard bolt: M14, length 65 mm.
Other sizes are available upon request
download Technical documentation (522 KB)
|
‹ back | more ›
|
FXR 1005
Application:
This rotule is intended for glass canopies which are easily accessible from the rear and includes the the silicone seal.
Type hole in the glass: cylindrical
Standard bolt: M14, length 65 mm.
Other sizes are available upon request
download Technical documentation (503 KB)
|
‹ back | more ›
|
FXR 1006
Application:
This rotule is recommended for canopies which are difficult to reach from the rear.
Type hole in the glass: cylindrical
Standard bolt: M14, length 65 mm.
Other sizes are available upon request
download Technical documentation (611 KB)
|
‹ back | more ›
|
FXR 1006 UV
Application
This rotule is suitable for an adhesive connection
Standard bolt: M14, length 65 mm
Other sizes are available upon request
download Technical documentation (434 KB)
|
‹ back | more ›
|
FXR 1008
Application:
This rotule is recommended for glass that is difficult to reach from the back.
Type hole in the glass: sunk.
Standard bolt: M14, length 65 mm.
Other sizes are available upon request.
download Technical documentation (548 KB)
|
‹ back | more ›
|
FXR 1019
Application
The head of this rotule is suitable to confirm in the inner panel of laminated glass.
Type hole in the glass: sunk
Standard bolt: M14, length 65 mm
Other sizes are available upon request
download Technical documentation (511 KB)
|
‹ back | more ›
|
FXR 1038
Application
This rotule is suitable to be mounted from the outside of the glass.
Type hole in the glass cylindrical
Standard bolt: M14, length 65 mm
Other sizes are available upon request
download Technical documentation (504 KB)
|
‹ back | more ›
|
FXR 1039
Application:
This rotule is intended for double-glazing in which only the inner glass panel has been drilled.
Type hole in the glass: cylindrical
Standard bolt: M14, length 65 mm
Other sizes are available upon request
download Technical documentation (499 KB)
|
‹ back | more ›
|
FXR 1103
Application:
This rotule is suitable for a small boring glass or in situations where the hole in the glass is under dimensioned. Also the glass should be easily accessible from the back.
Type hole in the glass cylindrical
Standard bolt: M14, length 65 mm
Other sizes are available upon request
download Technical documentation (459 KB)
|
‹ back | more ›
|
FXR 1106
Application:
This rotule is suitable for a small boring glass or in situations where the hole in the glass is under dimensioned. The assembly is from the outside of the glass.
Type hole in the glass cylindrical
Standard bolt: M14, length 65 mm
Other sizes are available upon request
download Technical documentation (582 KB)
|
‹ back | more ›
|
